How to replace a bathroom faucet: Keeping the bathroom clean and intact is important for our mind. You might have raised your eyebrows already after the previous statement. But think for a second, if our bathroom gets untidy and some points are leaking water then our moods automatically get down.
After all, no one wants something like that while many of us use our bathroom as our room for removing the knots of our thought processes. If we hear a sound of water leakage out of the bathroom faucet while being indulged into deep thought then everything suddenly gets disgusting.
Changing and replacing the faucet is the only solution. But getting a plumber on time is also a pesky task, moreover if plumber takes time to be in action then a lot of water will go into waste!
Nowadays many of us have gotten lazy and like to delegate the tasks but long ago our fathers and moms used to do these things themselves. Replacing a bathroom faucet is a rocket science. If we follow a few steps and if we know how exactly it gets fitted then getting a new faucet isn’t a big deal. Let’s find out the easiest DIY process to do it.
Replace a Bathroom Faucet- Points To Check Beforehand
Replacing any faucet needs three steps to make sure that the faucet got a proper fit. These steps are very common-
- We need to check the type of the faucet and get a similar kind purchased.
- Take the broken one out of the socket from the fitting area and replace that with the new one.
- Checking the newly fitted faucet whether it’s working fine or not.
Type of faucet: Before plunging into the method of replacing a bathroom faucet, we need to have an idea about the faucet that we are going to replace.
Well, there’re a number of options available in the market. But we have to purchase a similar kind that we have in our bathroom.
Popular types are single hole and triple hole. In most cases, a single hole faucet is used. But getting a thorough check may help us from spending our bucks in vain.
Once we are sure about the faucet type, we need to find a good one. For reference, you can check our review of best bathroom faucets.
Check P Trap: While setting up the faucet, we need to check the P trap below the sink. There’s a small valve at the bottom. It prevents excess flow of water which can do further damage.
Removal of the old faucet: Now it’s the turn to remove the old faucet carefully. A wrench comes into action to loosen the flexible part from the wall valve. We shouldn’t forget to release the pressure of the valve beforehand. The valve controls pressure.
#TIP: Keeping a bucket helps to get the excess water from getting drained. Save water cause it’s precious.
Removal of the supports: Any faucet is fitted with the help of a number of nuts and bolts along with a clamp maximum time. While getting the faucet out, we need to disassemble the supports also. Otherwise something may come out suddenly. We don’t have any intent to damage anything. With the help of the wrench, it can be detached.
Installation of the new faucet: Now, we need to get the new faucet placed into its place. Till now, we have only done the steps of removing the old one. Now, it’s time to install the new faucet on the countertop. Installation of any faucet is same more or less. We recommend to go through the user manual available with every faucet.
Fix the position of the valves: If you are going through it for a single hole faucet then this step isn’t for you. If you are fitting a faucet for cold and hot water both then go through it carefully. With the help of the C clip we can fix the hot valve at the left and cold valve at the right side. C clip actually nothing but a support to keep the valve at the top.
Reconnect the drainage system: Now, we need to connect the extension of the drainage pipes with the rod available below the sink. The nuts and bolts should be tightened properly otherwise water leakage may flood our bathroom or slow leakage can drain out water. Once clamps are tightened, rotate the knob slowly to check. If everything seems fine, double check it by increasing pressure. We are almost done with the process. We replace a bathroom faucet!
Human can learn anything if it’s needed. This kind of tasks are necessary to learn because it saves time and money both. For another time, we recommend to check the type of faucet and total peripheral things like pipe, clamps, nuts etc while you have decided to replace a bathroom faucet that’s giving you troubles.
We recommend to go through the guide a couple of times if it’s not understand in a single throw. Ask anything by commenting below. Be assured about the things you are going to do and rehearse before plunging into actual action. Don’t forget to let us know how’s your first time experience doing replace a bathroom faucet.